Характеристики и описание
Mechanical values and environment | |
|---|---|
| Design | Upright |
| Material | |
| Active face | PBT |
| Housing material | Die-cast aluminum |
| Weight | |
| Approx. | 0,4 kg |
| Ambient temperature | -25 ... +70 °C |
| Degree of protection | IP67 Only screwed tight with the related mating connector. |
| Proximity switch spacing | 12 mm |
| Switching principle | NC |
| Number of switching elements | 2 |
| Number of NC contacts | 2 |
| Connection | |
| 1 x plug connector M12 5-pin, straight plug connector: Cable outlet not adjustable. | |
| Connection terminals on the switching element | |
Electrical connection ratings | |
| Test pulses | |
| T (LOW) on sensor pulsing | 0,1 ... 20 ms |
| LOW level | |
| On sensor pulsing | 0 ... 5 V DC |
| Mark/space ratio Ton | |
| T (HIGH) : T (LOW) on sensor pulsing | 0.167361111111111 |
| Operating current | Current consumption without loadmax.5 mA |
| Operating voltage | |
| DC | 20 ... 24 V 33 V Power supply unit with electrical isolation as per EN 61558-2-6 or sensor pulsing UB (HIGH) |
| Rated operating current Ie | 250 mA |
| Utilization category according to EN 60947-5-2 | |
| DC-12 | 250 mA, 33 V For DC-13 the output must be protected with a free-wheeling diode for inductive loads. |
| Short circuit and overload protection, pulsed | Yes |
| Residual ripple | |
| From UB or UB(HIGH) | max.10 % |
| Reverse polarity protection | Yes |
| EMC protection requirements | EN 60947-5-2 |
| Type of output | PNP |
| Off-state current Ir | max.0,001 mA |
| Voltage drop Ud | |
| DC | max.2,5 V |
| Switching frequency, electrical | max.500 Hz |
| Safety class | |
| EN IEC 61140 | III |
| LED indicator | |
| At 6.8mA | Yes LED yellow |
Operating distance | |
| Repeat accuracy R | |
| According to EN 60947-5-2 | max.5 % |
| Rated operating distance Sn | 5 mm |
| Assured operating distance Sa | 0 ... 4 mm Dimension only applies for steel (ST37) and for EUCHNER trip dogs of series UX.. / GX.. |
| Switching hysteresis | 0,2 ... 1,0 mm In the installed state |
| Center offset | |
| At s = 4 mm | mON = (-) 0.5 mm and mOFF = 0.0 For side approach |
| At s = 3 mm | mON = (-) 2.5 mm and mOFF = (-) 2.0 For side approach |
| At s = 2 mm | mON = (-) 3.3 mm and mOFF = (-) 3.0 For side approach |
| At s = 1 mm | mON = (-) 4.2 mm and mOFF = (-) 4.0 For side approach |
Miscellaneous | |
Mechanical values and environment
Доставка
Оплата и гарантии